FITSEAL™ Disposable OCCUPATIONAL
Hypoallergenic Adhesion Respirator/Mask N99 Mask is designed for first
responders, police officers and medical professionals for protection
against airborne contaminants.
Are you and your workplace prepared for the next viral or
bacterial
epidemic? Did the Swine Flu scare of 2009 leave you wondering
how you
would protect yourself if your workplace or community was
infected? If
so- then you need to invest in the FITSEAL Disposable
Hypoallergenic
Respirator/ N99 Mask.
N99 means that it has 500% more protection
than a N95 mask that most are familiar with.
The FitSeal™ adhesion respirator, born
after 5 years of R&D at
leading universities and laboratories, is the next generation in
personal respiratory protection. Its patent-pending technology enables
it to mold to most facial contours to form an adhesion seal between the
respirator and the face, minimizing the leakage common to conventional
respirators that are held in place by straps or rubber bands.
Fitseal™
is the first and only one-size-fits-all (conforming to almost all
facial contours) adhesion filtering facepiece respirator approved by
NIOSH under rule 42 CFR Part 84, and it has met the additional testing
requirements for new technology as part of respirator
certification.
Fitseal™ provides unsurpassed respiratory protection from
disease-causing bacteria, viruses, and toxic dust particles.
"Respirators
that don't seal properly around the face offer only the illusion of
protection"
Occupational Safety and Health Administration (OSHA) Technical Manual,
Section VIII
Protection
- Two-way multi-layered advanced filtration media captures
toxic, allergenic, and infectious airborne particles
- Extremely low particle penetration of 0.3 micron-sized
particles at an airflow rate of 85L/min
- CDC recommended against M. tuberculosis
- Puncture-, crush-, tear-, and fluid-resistant
- Synthetic Blood Penetration tested (ASTM F1862); no
penetration observed in 32 samples
- Flame-resistant tested (FDA 16 CFR Part 1610 Class 1); no
flame spread
- No exhalation valve that can spread disease-causing germs
- "N" type Fitseal™ respirators can be used for up
to 8 hours against particulate aerosols free of oil
- "P" type Fitseal™ respirators can be used without
time restrictions
for use against all particulate aerosols, including oily atmospheres
- Minimal accumulation of heat, carbon dioxide, and moisture
Comfort
- Large surface area ensures comfort and allows for ease of
breathing and talking
- Maintains an effective adhesion seal even if worn
upside-down
- One-size-fits-all design readily conforms to most facial
contours
- Does not interfere with headgear
- Reduces fogging of glasses and other protective eyewear
- Uses an FDA-cleared skin adhesion system that is safely
employed in
hospitals worldwide and has been tested by advanced skin research
dermatology laboratories
- Hypoallergenic, latex-free, and fiberglass-free
- Unsurpassed reliability and secure fit is maintained even
during intense physical activity so you can
..Breathe with Confidence
Practicality
- Flat design for compact packaging and portability
- Eliminates the need to procure, re-test, and inventory
multiple styles, sizes, and makes of conventional respirators
- Assures availability at time of need
- Simplifies fit-testing procedures (reduces time and cost)
- Contains no metal components, so will not interfere with
medical
imaging technologies such as MRI, X-ray, Ultrasound, Proton Beam, and
EMR
Fitseal™ Specifications:
• No Pressure
Points from metal noseclips and
staples compared to conventional masks
• Low inhalation and exhalation
resistance
• Viral Filtration Efficiency
(VFE) greater than 99.9%
• Bacterial Filtration Efficiency
(BFE) greater than 99.9%
• Synthetic Blood Penetration
(ASTM F1862) - none observed in 32 samples
• Flammability (FDA 16 CFR Part
1610 Class 1) – no flame spread
• Hypoallergenic, latex-free
& fiberglass-free
• MRI and X-ray safe when worn
according to instructions.